Name: Anchor for fixing thermal insulation with a metal nail and a thermal head LFH/TZ
Brand: Starfix
SKU: Starfix
Availability: InStock
Rating: 4 (4 reviews)

Anchor for fixing thermal insulation with a metal nail and a thermal head LFH/TZ

Anchor for fixing thermal insulation with a metal nail and a thermal head LFH/TZ

Trademark: Starfix
Country of origin: Poland

Starfix

4 reviews - Write a review

Цена: 0.00 грн.

Advantages

ITB technical assessment
Meets the requirements of DSTU B V.2.6-35: 2008, DSTU B V.2.6-36: 2008 and ETAG014
Specially shaped thrust zone for fast installation in solid materials
The perforated surface of the disc facilitates plaster work and guarantees high quality adhesion to the plaster.
The special thermal head prevents the formation of a cold bridge and protects the rod from moisture penetration.

Product information

Code	Diameter (drilling) nailed-in plastic anchor, mm	Nailed-in plastic anchor length, mm	Pressure disk diameter, mm	Thrust length, mm	Minimum installation depth, mm	Maximum thermal insulation thickness, mm	Minimum drilling depth for through installation, mm	Quantity per package, pcs.
LFH 10 160 TZ	10	160	60	50	50	110	170	200
LFH 10 180 TZ	10	180	60	50	50	130	190	200
LFH 10 200 TZ	10	200	60	50	50	150	210	150
LFH 10 220 TZ	10	220	60	50	50	170	230	150
LFH 10 240 TZ	10	240	60	50	50	190	250	100
LFH 10 260 TZ	10	260	60	50	50	210	270	100

Estimated pull-out load:

from concrete - 0.75 kN

from solid red brick - 0.75 kN

from solid silicate brick - 0.75 kN

from aerated concrete - 0.60 kN

Application area

Recommended for plaster facades and facades with a ventilated air layer.

For fixing such heat-insulating materials:

Styrofoam
Mineral wool
Styrofoam
Glass wool

Foundation materials

Technical Specifications

Characteristics
Length of spacing zone, mm	50
Nail material	steel
For fixing mineral wool	yes
For fixing foam	yes
For plaster facade	yes
For ventilated facade	yes

Installation instructions

Type of installation - push-through installation
For installation in aerated concrete, foam concrete, shell rock and ceramic hollow block, it is recommended to use only drilling without impact
Recommended mounting parameters:
minimum base thickness - 100 mm
minimum center distance between dowels - 100 mm
minimum distance from the edge of the base to the dowel - 100 mm
Installation instructions:
1. Drill a hole
2-3. Hammer to the stop, hitting the body of the dowel with a hammer
4-5. Hammer the spacer (nail) flush with the dowel