Name: Anchor for fixing thermal insulation with elongated expansion zone and polyamide rod ALN
Brand: EasyFix
SKU: EasyFix
Availability: InStock

Anchor for fixing thermal insulation with elongated expansion zone and polyamide rod ALN

Anchor for fixing thermal insulation with elongated expansion zone and polyamide rod ALN

Trademark: EasyFix
Country of origin: Ukraine

EasyFix

0 reviews - Write a review

Цена: 0.00 грн.

Advantages

Meets the requirements of DSTU B V.2.6-35: 2008, DSTU B V.2.6-36: 2008 and ETAG014
Extended thrust zone - 80mm
The shape of the expansion zone has been optimized for better installation in building materials
The perforated surface of the disc facilitates plaster work and guarantees high quality adhesion to the plaster.
Certified for use in all substrate categories A, B, C, D, E.

Product information

Code	Diameter (drilling) nailed-in plastic anchor, mm	Nailed-in plastic anchor length, mm	Pressure disk diameter, mm	Thrust length, mm	Minimum installation depth, mm	Maximum thermal insulation thickness, mm	Minimum drilling depth for through installation, mm	Quantity per package, pcs.
LDK 10 80 GZN	10	80	60	50	50	30	90	400
LDK 10 100 GZN	10	100	60	50	50	50	110	350
LDK 10 120 GZN	10	120	60	50	50	70	130	300
LDK 10 140 GZN	10	140	60	50	50	90	150	250
LDK 10 160 GZN	10	160	60	80	50	110	170	200
LDK 10 180 GZN	10	180	60	80	50	130	190	200
LDK 10 200 GZN	10	200	60	80	50	150	210	150
LDK 10 220 GZN	10	220	60	80	50	170	230	150
LDK 10 240 GZN	10	240	60	80	50	190	250	100
LDK 10 260 GZN	10	260	60	80	50	210	270	100

Расчетная нагрузка на вырывание :
c бетона - 0,4 kN
с полнотелого красного кирпича - 0,2 kN
с полнотелого силикатного кирпича - 0,2 kN
с пустотелого керамического блока - 0,2 kN
с газобетона - 0,2 kN

Application area

Recommended for plaster facades and facades with a ventilated air layer.
For fixing such heat-insulating materials:

Styrofoam
Mineral wool
Styrofoam
Glass wool

Foundation materials

Technical Specifications

Characteristics
Length of spacing zone, mm	80
Nail material	polyamide
For fixing mineral wool	yes
For fixing foam	yes
For plaster facade	yes
For ventilated facade	yes

Installation instructions

Type of installation - push-through installation
For installation in aerated concrete, foam concrete, shell rock and ceramic hollow block, it is recommended to use only drilling without impact
Recommended mounting parameters:
minimum base thickness - 100 mm
minimum center distance between dowels - 100 mm
minimum distance from the edge of the base to the dowel - 100 mm
Installation instructions:
1. Drill a hole
2-3. Hammer to the stop, hitting the body of the dowel with a hammer
4-5. Hammer the spacer (nail) flush with the dowel